| Disc One |
34 Mesh Thread to Positive |
Pre-Production |
| Opening Information |
35 Mesh Compromise in Printing |
69 Pre-Production Review |
| 1 Opening - Greetings and Suggestions |
36 Mesh Abrading |
70 Press Setup |
| 2 Screen Printing: What happened to the
silk? |
Emulsions and Stencils: Types and Uses |
71 The Tape Tricks |
| 3 Screen Printing: A Unique Process |
37 Direct Emulsions |
72 Platen Adhesive |
| 4 The Process: An Overview |
38 Emulsion Choices by Use |
Production One |
| Frames |
39 Mixing Diazo |
73 Product Loading and Unloading |
| 5 Frames are a Modular Platform for Mesh |
40 Exposure Latitude |
74 Printing Off-Contact |
| 6 Frame Choices |
41 Capillary and Combination Films |
75 Flood and Over-Flood |
| 7 Roller and Extending Retensionable Frames |
42 Indirect and Pre-cut Films |
76 Ink Volume |
| 8 Frame Maintenance |
Emulsion Application |
77 Squeegees |
| Graphics Basics |
43 Coating Trough or Scoop Coater |
Production Two |
| 9 Printing Colors |
44 Coating Trough |
78 Mesh Tension, Distortion, and Rolling |
| 10 Color Separations |
45 Coater Fill Level |
79 Printable Area and Distortion Areas |
| 11 Camera or Print-Ready Art |
46 How to Make and Use a Step Coating Test |
80 Flashing |
| 12 Art Programs |
47 Application of Capillary Films |
81 Print Order and the Three Rules |
| From Art to Screens |
Stencil Information |
Disc Four |
| 13 R.I.P and Film Positives |
48 E.O.M. (Emulsion Over Mesh) |
Production Three |
| 14 Film Positive Choices |
48 E.O.M. (Edge) |
82 Under-base Ink Layers and Review |
| 15 Film Positives: Halation |
50 E.O.M. (Printed results) |
83 Basics of Plastisol |
| 16 D-Min and D-Max |
51 Rz Value, Measurement, and Printed Results |
84 Jackets and Fleece |
| 17 Direct to Screen |
52 Face Coating Defined |
85 Special Inks and Tips |
| Art Terms and Information |
Drying Screens |
86 Transfers |
| 18 Three "PI" Terms |
53 Horizontal or Vertical Drying |
87 Numbering |
| 19 The Butt, Trap, and Choke |
54 Contamination |
Ink Information |
| 20 Halftone Dot Shapes |
55 Drying Efficiency |
88 Dryers and Plastisol Cure |
| 21 Dot and Mesh Angle |
56 Drying Cabinets: Definition and Overview |
89 Uncured Plastisol |
| 22 Tonal-Range Compression |
57 Coated Screen Storage |
90 Testing Plastisol for a Cure |
| Separations |
Exposure |
91 Fibrillation |
| 23 Building an Under-base |
58 Exposure Equipment |
92 Sublimation, Dye Migration, and Bleeding |
| 24 Printing Separations |
59 The Step Test Wedge |
93 Orange Peel |
| 25 Four Color Process |
60 Exposure Calculator |
Post Production |
| 26 Spot Color |
Disc Three |
94 Break Down |
| 27 Simulated or Spot Process |
Exposure, continued |
95 On-Press Washes |
| Mesh Information |
61 Exposure Reading with SBQ Emulsions |
96 Ink Degraders |
| 28 Mesh Fabrics |
62 Exposure Reading with Diazo |
97 Stencil Removers |
| 29 Mesh Threads and Types |
63 Underexposure |
98 Haze and Ghost Removers |
| 30 Mesh Weave and Printing Issues |
64 Exposing Screens with Positives |
99 Degreasing |
| 31 Mesh Fabric Color |
Developing Screens |
Industrial Safety |
| 32 Mesh Fabric Color and Exposure |
65 Wash Development |
100 Chemical Exposure, Pollution, and Disposal |
| Disc Two |
66 Underexposure and Thread Growth |
101 Safety and MSDS Information |
| Mesh Information, continued |
67 Scumming |
102 Credits and Thanks |
| 33 Mesh Thread Size |
68 Screen Preparation |
|
---- --- - --- - 
----- - --- - 
---
-
---- --- -
---- --- -
---- --- -
